| ALKALINE SULFITE ANTHRAQUINONE AND METHANOL (ASAM) PULPING PROCESS OF TROPICAL BAMBOO (GIGANTOCHLOA SCORTECHINII) |
NON-FRIM |
| ASSESSMENT OF DUST EMISSION AND WORKING CONDITIONS IN THE BAMBOO AND WOODEN FURNITURE INDUSTRIES IN MALAYSIA |
NON-FRIM |
| BAMBOO, THERMOPLASTIC, THERMOSETS, AND THEIR COMPOSITES: A REVIEW |
NON-FRIM |
| CHARCOAL PROPERTIES OF MALAYSIAN BAMBOO CHARCOAL CARBONIZED AT 750 °C |
NON-FRIM |
| DEVELOPMENT OF SEAWEED-BASED BAMBOO MICROCRYSTALLINE CELLULOSE FILMS INTENDED FOR SUSTAINABLE FOOD PACKAGING APPLICATIONS |
NON-FRIM |
| EFFECT OF CHEMICAL PRETREATMENT ON PULP AND PAPER CHARACTERISTICS OF BAMBOO GIGANTOCHLOA SCORTECHINII KRAFT FIBERS |
NON-FRIM |
| EFFECTS OF BAMBOO DENSITY AND CHEMICAL PROPERTIES ON THE PROPERTIES OF PARTICLEBOARD PRODUCED FROM GIGANTOCHLOA SCORTECHINII |
NON-FRIM |
| FAILURE MECHANISMS OF STRUCTURAL BAMBOO USING MICROSTRUCTURAL ANALYSES |
NON-FRIM |
| INFLUENCE OF ALKALI TREATMENT ON PHYSIO-CHEMICAL PROPERTIES OF MALAYSIA BAMBOO FIBER: A PRELIMINARY STUDY |
NON-FRIM |
| NONWOVEN MEMBRANE SUPPORTS FROM RENEWABLE RESOURCES: BAMBOO FIBER REINFORCED POLY (LACTIC ACID) COMPOSITES |
NON-FRIM |
| PERFORMANCE OF FLY ASH GEOPOLYMER CONCRETE INCORPORATING BAMBOO ASH AT ELEVATED TEMPERATURE |
NON-FRIM |
| PHYSICO-MECHANICAL PROPERTIES OF LAMINATES MADE FROM SEMANTAN BAMBOO AND SESENDUK WOOD DERIVES FROM MALAYSIA’S SECONDARY FOREST |
NON-FRIM |
| MECHANICAL PERFORMANCE EVALUATION OF BAMBOO FIBRE REINFORCED POLYMER COMPOSITES AND ITS APPLICATIONS: A REVIEW |
NON-FRIM |
| POTENTIAL AND STRUCTURAL VARIATION OF SOME SELECTED CULTIVATED BAMBOO SPECIES IN PENINSULAR MALAYSIA |
NON-FRIM |
| PREPARATION AND CHARACTERIZATION OF MICROCRYSTALLINE CELLULOSE FROM SACRED BALI BAMBOO AS REINFORCING FILLER IN SEAWEED-BASED COMPOSITE FILM |
NON-FRIM |
| PRODUCTION AND CHARACTERIZATION OF BAMBOO-BASED ACTIVATED CARBON THROUGH SINGLE-STEP H3PO4 ACTIVATION FOR C02 CAPTURE |
NON-FRIM |
| PRODUCTION OF ACTIVATED CARBON FROM INDUSTRIAL BAMBOO WASTES |
FRIM |
| INTERIOR GRADE PARTICLEBOARD FROM BAMBOO (GIGANTOCHLOA SCORTECHINII): INFLUENCE OF AGE, PARTICLE SIZE, RESIN AND WAX CONTENT ON BOARD PROPERTIES |
NON-FRIM |
| MALAYSIA TEXTILE CRAFT INDUSTRY: INNOVATION INSPIRED BY BAMBOO FOR BATIK BLOCK CONTEMPORARY DESIGN |
NON-FRIM |
| MAPPING BAMBOO IN BERANGKAT FOREST RESERVE, KELANTAN MALAYSIA USING AIRBORNE HYPERSPECTRAL IMAGING SENSOR |
NON-FRIM |
| MECHANICAL AND MORPHOLOGICAL PROPERTIES OF BAMBOO MESOPARTICLE/NYLON 6 COMPOSITES |
NON-FRIM |
| MECHANICAL PROPERTIES OF BAMBOO REINFORCED EPOXY SANDWICH STRUCTURE COMPOSITES |
NON-FRIM |
| MECHANICAL PROPERTIES OF DIFFERENT BAMBOO SPECIES |
NON-FRIM |
| NUTRITIONAL COMPOSITIONS, BIOLOGICAL ACTIVITIES, AND PHYTOCHEMICAL CONTENTS OF THE EDIBLE BAMBOO SHOOT, DENDROCALAMUS ASPER, FROM MALAYSIA |
NON-FRIM |
| OPTIMISATION OF MECHANICAL PROPERTIES OF BAMBOO FIBRE REINFORCED-PLA BIOCOMPOSITES |
NON-FRIM |
| PARAMETER OPTIMIZATION VIA THE TAGUCHI METHOD TO IMPROVE THE MECHANICAL PROPERTIES OF BAMBOO PARTICLE REINFORCED POLYLACTIC ACID COMPOSITES |
NON-FRIM |
| PENETRATION CLASS AND NET DRY SALT RETENTION OF AMMONIACAL COPPER QUARTENARY, BORAX BORIC ACID AND COPPER CHROME ARSENIC IN 2 AND 4 YEAR-OLD BAMBOO GIGANTOCHLOA SCORTECHINII |
NON-FRIM |
| PENETRATION OF PHENOL-FORMALDEHYDE (PF) IN MALE BAMBOO (DENDROCALAMUS STRICTUS) AT VARIOUS MOISTURE CONTENT |
NON-FRIM |
| PROPERTIES OF CORRUGATED PAPER FROM RECYCLED PAPER BLENDED WITH SAMANTAN BAMBOO PULP |
FRIM |
| PROPERTIES OF PARALLEL STRAND LUMBER FROM CALCUTTA BAMBOO (DENDROCALAMUS STRICTUS) |
NON-FRIM |
| PROPERTIES OF PHENOL FORMALDEHYDE-BONDED LAYERED LAMINATED WOVEN BAMBOO MAT BOARDS MADE FROM GIGANTOCHLOA SCORTECHINII |
NON-FRIM |
| PULP AND PAPERMAKING FROM SUSTAINABLE LIGNOCELLULOSIC BAMBOO |
NON-FRIM |
| PULPING YIELD AND MECHANICAL PROPERTIES OF UNBEATEN BAMBOO PAPER |
FRIM |
| QUALITY MANAGEMENT OF BAMBOO RESOURCE AND ITS CONTRIBUTION TO ENVIRONMENTAL CONSERVATION IN MALAYSIA |
NON-FRIM |
| PROPERTIES OF GIGANTOCHLOA SCORTECHINII PAPER ENHANCEMENT BY BEATING REVOLUTION |
NON-FRIM |
| VARIATION IN ANATOMICAL PROPERTIES OF THREE MALAYSIAN BAMBOOS FROM NATURAL STANDS |
FRIM |
| QUANTIFYING TENSILE PROPERTIES OF BAMBOO SILICONE BIOCOMPOSITE USING YEOH MODEL |
NON-FRIM |
| QUASI-STATIC COMPRESSION PROPERTIES OF BAMBOO AND PVC TUBE REINFORCED POLYMER FOAM STRUCTURES |
NON-FRIM |
| RECYCLED PAPER ENHANCEMENT WITH SEMANTAN BAMBOO VIRGIN PULP FOR CORRUGATED PAPER MANUFACTURING |
NON-FRIM |
| ROLE OF DISPERSION TIME ON THE PROPERTIES OF ENZYMATIC-TREATED BAMBOO CELLULOSE NANOFIBERS |
FRIM |
| SPECTROSCOPIC, THERMAL, AND ANATOMICAL CHARACTERIZATION OF CULTIVATED BAMBOO (GIGANTOCHLOA SPP.) |
FRIM |
| STRENGTH AND DURABILITY OF BAMBOO TREATED THROUGH AN OIL-CURING PROCESS |
FRIM |
| THE EFFECT OF STACKING SEQUENCE OF WOVEN BAMBOO ON MECHANICAL BEHAVIOR OF FIBER-REINFORCED COMPOSITES |
NON-FRIM |
| THE EFFECTS OF DRYING TECHNIQUES ON PHYTOCHEMICAL CONTENTS AND BIOLOGICAL ACTIVITIES ON SELECTED BAMBOO LEAVES |
NON-FRIM |
| THE EFFECTS OF MULTI-WALLED CNT IN BAMBOO/GLASS FIBRE HYBRID COMPOSITES: TENSILE AND FLEXURAL PROPERTIES |
NON-FRIM |
| THE FACTOR OF INDUSTRIAL DEVELOPMENT PROBLEMS ON BAMBOO FURNITURE DESIGNS IN MALAYSIA: A CONCEPT PAPER |
NON-FRIM |
| THE NATURAL FIBER COMPOSITES BASED ON BAMBOO FIBERS: A REVIEW |
NON-FRIM |
| THE POTENTIAL OF UTILISING BAMBOO CULM (GIGANTOCHLOA SCORTECHINII) IN THE PRODUCTION OF STRUCTURAL PLYWOOD |
FRIM |
| STRENGTH PROPERTIES OF PRESERVATIVE TREATED GIGANTOCHLOA SCORTECHINII AFTER VACUUM IMPREGNATION PROCESS |
NON-FRIM |
| STUDY OF HOMOGENEOUS CHIPBOARD MANUFACTURING USING BETUNG BAMBOO (DENDROCALAMUS ASPER) MIXED WITH POLYETHYLENE ADDICTIVE |
NON-FRIM |
| STUDY ON SPECIMENS SHAPES FOR TENSILE TEST OF MALAYSIA BAMBOO |
NON-FRIM |
| SUB-PIXEL TECHNIQUE OF REMOTELY SENSED DATA FOR EXTRACTING BAMBOO AREAS IN TEMENGOR FOREST RESERVE, PERAK, MALAYSIA |
NON-FRIM |
| SULPHATE RESISTANCE OF GEOPOLYMER BAMBOO ASH CONCRETE |
NON-FRIM |
| SUSTAINABLE CLEAN WATER PRODUCTION USING BAMBOO ACTIVATED CARBON FOR RURAL RESIDENTS IN THE BORNEO ISLAND |
NON-FRIM |
| HIGH-PRESSURE ENZYMATIC HYDROLYSIS TO REVEAL PHYSICOCHEMICAL AND THERMAL PROPERTIES OF BAMBOO FIBER USING A SUPERCRITICAL WATER FERMENTER |
FRIM |
| MECHANICAL PROPERTIES OF LAYERED LAMINATED WOVEN BAMBOO GIGANTOCHLOA SCORTECHINII/EPOXY COMPOSITES |
NON-FRIM |
| POLYANILINE-MODIFIED NANOCELLULOSE PREPARED FROM SEMANTAN BAMBOO BY CHEMICAL POLYMERIZATION: PREPARATION AND CHARACTERIZATION |
NON-FRIM |
| POLYESTER COMPOSITES FILLED CARBON BLACK AND ACTIVATED CARBON FROM BAMBOO (GIGANTOCHLOA SCORTECHINII): PHYSICAL AND MECHANICAL PROPERTIES |
NON-FRIM |
| POST-BUCKLING OF BAMBOO REINFORCED COMPOSITE PLATES |
NON-FRIM |
| MORPHOLOGICAL STUDY AND BIODEGRADABILITY OF PLA/PBAT THIN-FILM REINFORCED WITH MICROCRYSTALLINE CELLULOSE FROM BAMBOO |
NON-FRIM |
| PHYSICAL AND MECHANICAL PROPERTIES OF BAMBOO-SILICONE BIOCOMPOSITES (BASICS) |
NON-FRIM |
| PHYSICAL AND MECHANICAL PROPERTIES OF GIGANTOCHLOA SCORTECHINII BAMBOO SPLITS AND STRIPS |
FRIM |
| PHYSICAL CHARACTERISTICS, ANATOMY AND PROPERTIES OF MANAGED GIGANTOCHLOA SCORTECHINII NATURAL BAMBOO STANDS. |
NON-FRIM |
| PHYSICAL PROPERTIES AND SOIL DEGRADATION OF PLA/PBAT BLENDS FILM REINFORCED WITH BAMBOO CELLULOSE |
NON-FRIM |
| PHYSICAL, MECHANICAL AND MORPHOLOGICAL PROPERTIES OF LAMINATED BAMBOO HYBRID COMPOSITE: A POTENTIAL RAW MATERIAL FOR FURNITURE MANUFACTURING |
NON-FRIM |
| A CONCISE REVIEW OF DENDROCALAMUS ASPER AND RELATED BAMBOOS: GERMPLASM CONSERVATION, PROPAGATION AND MOLECULAR BIOLOGY |
FRIM |
| A MOCKUP UNIT OF THE AN-ECO BUDGET BAMBOO CHALET: DESIGN AND COST ESTIMATION ANALYSIS |
NON-FRIM |
| A NEW SPECIES OF BAMBUSASPIS COCKERELL (HEMIPTERA: STERNORRHYNCHA: COCCOMORPHA) COLONISING BAMBOO IN MALAYSIA. |
NON-FRIM |
| A PERFORMANCE STUDY ON COMPOSITES MADE FROM BAMBOO FABRIC AND POLY (LACTIC ACID) |
NON-FRIM |
| A REVIEW ON THE TENSILE PROPERTIES OF BAMBOO FIBER REINFORCED POLYMER COMPOSITES |
NON-FRIM |
| ADHESION AND BONDING PROPERTIES OF LOW MOLECULAR WEIGHT PHENOL FORMALDEHYDE-TREATED PLYBAMBOO |
FRIM |
| MERCERIZATION OPTIMIZATION OF BAMBOO (BAMBUSA VULGARIS) FIBER-REINFORCED EPOXY COMPOSITE STRUCTURES USING A BOX–BEHNKEN DESIGN |
NON-FRIM |
| MICRO CRYSTALLINE BAMBOO CELLULOSE BASED SEAWEED BIODEGRADABLE COMPOSITE FILMS FOR SUSTAINABLE PACKAGING MATERIAL |
NON-FRIM |
| MICROWAVE-ASSISTED CO-PYROLYSIS OF BAMBOO BIOMASS WITH PLASTIC WASTE FOR HYDROGEN-RICH SYNGAS PRODUCTION |
NON-FRIM |
| MORPHOLOGICAL AND ANATOMICAL CHARACTERISTICS OF MANAGED NATURAL BAMBOO STANDS GIGANTOCHLOA SCORTECHINII |
NON-FRIM |
| MORPHOLOGICAL, CHEMICAL AND THERMAL ANALYSIS OF CELLULOSE NANOCRYSTALS EXTRACTED FROM BAMBOO FIBRE |
NON-FRIM |
| PROPERTIES PARTICLEBOARD MANUFACTURED FROM COMMONLY UTILIZED MALAYSIAN BAMBOO (GIGANTOCHLOA SCORTECHINII) |
NON-FRIM |
| BAMBOO AS AN ECO-FRIENDLY MATERIAL FOR USE IN AQUACULTURE INDUSTRY IN MALAYSIA |
NON-FRIM |
| BAMBOO AS FUTURE BIO-INDUSTRIAL MATERIAL: PHYSICAL BEHAVIOUR AND BENDING STRENGTH OF) MALAYSIA’S BETING BAMBOO (GIGANTOCHLOA LEVIS) |
NON-FRIM |
| BAMBOO AS SOURCE OF ENERGY |
FRIM |
| BAMBOO FABRIC REINFORCED POLYPROPYLENE AND POLY (LACTIC ACID) FOR PACKAGING APPLICATIONS: IMPACT, THERMAL, AND PHYSICAL PROPERTIES |
NON-FRIM |
| BAMBOO REINFORCED POLYMER COMPOSITE - A COMPREHENSIVE REVIEW |
NON-FRIM |
| BAMBOO SPECIES AND UTILIZATION IN MALAYSIA: A MINI REVIEW |
NON-FRIM |
| BAMBOO-FIBER-REINFORCED THERMOSET AND THERMOPLASTIC POLYMER COMPOSITES: A REVIEW OF PROPERTIES, FABRICATION, AND POTENTIAL APPLICATIONS |
NON-FRIM |
| BENDING BAMBOO: RESTRUCTURING RURAL ELECTRIFICATION IN SARAWAK, MALAYSIA |
NON-FRIM |
| BIOENERGY PRODUCTION FROM BAMBOO: POTENTIAL SOURCE FROM MALAYSIA'S PERSPECTIVE |
NON-FRIM |
| BOND BEHAVIOR OF DEFORMED BAMBOO (BAMBUSA VULGARIS) EMBEDDED IN FLY ASH GEOPOLYMER CONCRETE |
NON-FRIM |
| CARBOHYDRATES IN SOME NATURAL STAND BAMBOOS |
FRIM |
| CARBON NANOTUBES (CNTS) AS NANOFILLERS IN BAMBOO/GLASS HYBRID COMPOSITES AND THEIR EFFECT ON TENSILE, FLEXURAL AND IMPACT PROPERTIES |
NON-FRIM |
| CHEMICAL AND THERMAL CHARACTERIZATION OF MALAYSIAN BAMBOO LIGNIN (BETING & SEMANTAN) EXTRACTED VIA SODA PULPING METHOD |
NON-FRIM |
| CLEANER CONVERSION OF BAMBOO INTO CARBON FIBRE WITH FAVOURABLE PHYSICOCHEMICAL AND CAPACITIVE PROPERTIES VIA MICROWAVE PYROLYSIS COMBINING WITH SOLVENT EXTRACTION AND CHEMICAL IMPREGNATION |
NON-FRIM |
| COMPARATIVE STUDY ON THE THERMAL ENVIRONMENTAL RESPONSES OF INDIGENOUS BAMBOO AND MODERN BRICK HOUSES IN HOT HUMIDCLIMATE OF MALAYSIA |
NON-FRIM |
| DEMONSTRATION OF THE ADVANTAGES OF USING BAMBOO-LIKE NANOTUBES FOR ELECTROCHEMICAL BIOSENSOR APPLICATIONS COMPARED WITH SINGLE WALLED CARBON NANOTUBES |
NON-FRIM |
| DEVELOPMENT AND CHARACTERIZATION OF BAMBOO FIBER REINFORCED BIOPOLYMER FILMS |
NON-FRIM |
| DISPOSAL OPTIONS OF BAMBOO FABRIC-REINFORCED POLY (LACTIC) ACID COMPOSITES FOR SUSTAINABLE PACKAGING: BIODEGRADABILITY AND RECYCLABILITY |
NON-FRIM |
| DISTRIBUTION AND SPECIES DIVERSITY OF BAMBOO AT KUALA KENIAM, PAHANG NATIONAL PARK |
NON-FRIM |
| DISTRIBUTION OF ZINC OXIDE NANOPARTICLES ON UNBLEACHED AND BLEACHED BAMBOO PAPER VIA IN-SITU APPROACHES |
FRIM |
| DURABILITY ASSESSMENT OF PRESERVATIVES TREATED BAMBUSA VULGARIS IN UNSTERILE SOIL BURIAL TESTS |
NON-FRIM |
| DURABILITY PERFORMANCE OF GIGANTOCHLOA SCORTECHINII THROUGH LABORATORY FUNGAL DECAY TESTS |
NON-FRIM |
| EARLY FIELD GROWTH PERFORMANCE OF TEN SELECTED BAMBOO TAXA: THE CASE STUDY OF SABAL BAMBOO PILOT PROJECT IN SARAWAK, MALAYSIA |
NON-FRIM |
| EFFECT OF CURING TIME ON PHYSICAL AND MECHANICAL PROPERTIES OF PHENOLIC-TREATED BAMBOO STRIPS |
NON-FRIM |
| EFFECT OF OUTDOOR EXPOSURE ON SOME PROPERTIES OF RESIN-TREATED PLYBAMBOO |
FRIM |
| EFFECT OF SODA-ANTHRAQUINONE PULPING CONDITIONS AND BEATING REVOLUTION ON THE MECHANICAL PROPERTIES OF PAPER MADE FROM GIGANTOCHLOA SCORTECHINII (SEMANTAN BAMBOO) |
NON-FRIM |
| EFFECTS OF AGE AND HEIGHT OF THREE BAMBOO SPECIES ON THEIR MACHINING PROPERTIES |
|
| EFFECTS OF AGE AND HEIGHT ON SELECTED PROPERTIES OF MALAYSIAN BAMBOO (GIGANTOCHLOA LEVIS) |
FRIM |
| EFFECTS OF ALKALINE SULFITE ANTHRAQUINONE AND METHANOL PULPING CONDITIONS ON THE MECHANICAL AND OPTICAL PAPER PROPERTIES OF BAMBOO (GIGANTOCHLOA SCORTECHINII) |
NON-FRIM |
| EFFECTS OF CHEMICAL TREATMENTS ON DURABILITY PROPERTIES OF GIGANTOCHLOA SCORTECHINII STRIPS AND PLY-BAMBOO |
FRIM |
| EFFECTS OF CULM HEIGHT LEVELS AND NODE PRESENCE ON MECHANICAL PROPERTIES AND FRACTURE MODES OF GIGANTOCHLOA SCORTECHINII STRIPS LOADED IN SHEAR PARALLEL TO GRAIN |
NON-FRIM |
| EMPOWERING TRADITIONAL HERITAGE THROUGH ANGKLUNG MUSICAL INSTRUMENTS: A CASE STUDY IN MALAYSIA |
NON-FRIM |
| EQUILIBRIUM MOISTURE CONTENT AND VOLUMETRIC CHANGES OF GIGANTOCHLOA SCORTECHINII |
FRIM |
| EVALUATION OF SCREW PULLING AND FLEXURAL STRENGTH OF BAMBOO-BASED OIL PALM TRUNK VENEER HYBRID BIOCOMPOSITES INTENDED FOR FURNITURE APPLICATIONS |
NON-FRIM |
| EVALUATION ON THE HYBRIDIZATION EFFECT ON THE THERMAL AND THERMO-OXIDATIVE STABILITY OF BAMBOO/KENAF/EPOXY HYBRID COMPOSITES |
NON-FRIM |
| FIRE-RETARDANT AGENT REINFORCED BAMBOO KRAFT PAPER |
NON-FRIM |
| FORMABILITY ANALYSIS OF BAMBOO FABRIC REINFORCED POLY (LACTIC) ACID COMPOSITES |
NON-FRIM |
| FUNGAL COLONISATION AND DECAY IN TROPICAL BAMBOO SPECIES |
NON-FRIM |
| GREEN COMPOSITES MADE OF BAMBOO FABRIC AND POLY (LACTIC) ACID FOR PACKAGING APPLICATIONS—A REVIEW |
NON-FRIM |
| GROWTH PERFORMANCE OF TEMPERATE BAMBOO SPECIES IN PENINSULAR MALAYSIA |
FRIM |
| HYPERELASTIC PROPERTIES OF BAMBOO CELLULOSIC FIBRE–REINFORCED SILICONE RUBBER BIOCOMPOSITES VIA COMPRESSION TEST |
NON-FRIM |
| IN SITU FORMATION OF ZINC OXIDE ON BAMBOO BLEACHED PULP IN PREPARATION OF ANTIBACTERIAL PAPER: EFFECT OF PRECURSORS ADDITION |
NON-FRIM |
| ANALYSING IMPACT PROPERTIES OF CNT FILLED BAMBOO/GLASS HYBRID NANOCOMPOSITES THROUGH DROP-WEIGHT IMPACT TESTING, UWPI AND COMPRESSION-AFTER-IMPACT BEHAVIOUR |
NON-FRIM |
| ANALYSIS OF CALCUTTA BAMBOO FOR STRUCTURAL COMPOSITE MATERIALS: PHYSICAL AND MECHANICAL PROPERTIES |
NON-FRIM |
| ANALYSIS ON STRENGTH BEHAVIOUR OF MALAYSIAN BAMBOO SPECIES |
NON-FRIM |
| ANATOMICAL PROPERTIES OF CULTIVATED 3 YEAR OLD BAMBOO GIGANTOCHLOA LEVIS AND G. SCOTECHINII |
NON-FRIM |
| ANATOMICAL, PHYSICAL AND STRENGTH PROPERTIES OF SHIZOSTACHYUM BRACHYCLADUM (BULUH LEMANG) |
FRIM |
| ANATOMICAL, PHYSICAL, AND MECHANICAL PROPERTIES OF THIRTEEN MALAYSIAN BAMBOO SPECIES |
FRIM |
| TECHNOLOGICAL DEVELOPMENT OF BAMBOO FOR “BATIK” STAMP IN MALAYSIAN TEXTILE INDUSTRIES |
NON-FRIM |
| TENSILE BEHAVIOUR OF CHEMICAL TREATMENT FOR BAMBOO EPOXY COMPOSITES |
NON-FRIM |
| TENSILE MECHANICS OF BAMBOO STRIPS |
NON-FRIM |
| TENSILE PROPERTIES AND MICROSTRUCTURE OF SINGLE-CELLULOSIC BAMBOO FIBER STRIPS AFTER ALKALI TREATMENT |
NON-FRIM |
| TENSILE PROPERTIES OF SINGLE CELLULOSIC BAMBOO FIBER (GIGANTOCHLOA SCORTECHINII) USING RESPONSE SURFACE METHODOLOGY |
NON-FRIM |
| THE ‘REVERSE BAMBOO NETWORK’: SOCIOCULTURAL DIALECTICS OF CHINA’S FDI IN HOUSING (FDIH) IN ISKANDAR MALAYSIA |
NON-FRIM |
| THE PRODUCTION OF MALAYSIA BAMBOO CHARCOAL (GIGANTOCHLOA ALBOCILIATA) AS THE POTENTIAL ABSORBENT |
NON-FRIM |
| THE SCRUTINIZES OF ANATOMICAL STRUCTURE USING FIBER RUNKLE'S RATIO AND SCANNING ELECTRON MICROSCOPY ON MATURED GIGANTOCHLOA LEVIS AND G. SCORTECHINII |
NON-FRIM |
| THERMAL ANALYSIS OF BAMBOO FIBRE AND ITS COMPOSITES |
NON-FRIM |
| THERMAL AND FT-IR CHARACTERIZATION OF GIGANTOCHLOA LEVIS AND GIGANTOCHLOA SCORTECHINII BAMBOO, A NATURALLY OCCURRING POLYMERIC COMPOSITE |
FRIM |
| ULTRASONIC ASSISTED DISSOLUTION OF BAMBOO BIOMASS USING ETHER-FUNCTIONALIZED IONIC LIQUID |
NON-FRIM |
Log Masuk